NEW PRODUCTS

ADVANCED FLOW FORD TURBO

What It Is:
aFe BladeRunner Turbocharger For 1999 ½ -03 Ford 7.3L Trucks

Why You Want It:
This BladeRunner turbocharger features a gold anodized billet compressor wheel that’s lighter and stronger than the stock cast wheel to help provide quicker “spool-up” and higher airflow than the stock turbo. The compressor features a lightweight billet compressor wheel with 60mm inducer and 80mm exducer (49 trim) to improve turbo spool-up and handle high wheel speeds and boost pressures. A CNC-machined, black anodized billet aluminum wastegate actuator comes preset, but is adjustable and is capable of higher boost pressures with an appropriate tuner. An optional high-flow turbine outlet also helps lower exhaust gas temperature. This turbo can be installed as a direct bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. Additional fueling is not required for improved performance over OE, but maximum gains are achieved from fuel system upgrades, either electronic or mechanical.

Where To Get It:
aFe Power, 888-493-7135, www.afepower.com

ICG FOUR-LINK SUPER DUTY SUSPENSION

What It Is:
Four-Link Front End Conversion For 2000-04 Ford Super Duty 4wd Pickup

Why You Want It:
The full-traction ICG (Instant Center Geometry) four-link front end conversion kit for Ford Super Duty 4wd pickups will allow builders to raise their Ford to the next level. The kit includes all necessary components to convert an F-250/F-350 Super Duty from front leaf springs to a custom four-link suspension. This kit will provide up to 8 inches of lift and up to a total of 24.5 inches in extended length in the front. This ICG kit will accept all major brands of 2.5-3.0-inch coilover front shocks with a hose and reservoir. For vehicles that are being upgraded from an existing lift, the builder can use existing rear leaf springs, blocks, shocks, etc., or add other parts depending on what’s needed. Upgrade your Super Duty to an ICG suspension for the ultimate in capability and cool.

Where To Get It:
Full Traction Suspension, 800-255-6464, www.full-traction.com

RAM TRUCK COILOVER CONVERSION

What It Is:
Front Spring/Shock Upgrade

Why You Want It:
If you own a 2003-2012 2500 or 3500 4×4 Ram truck and want to improve the ride, consider this front coilover upgrade. Compared to the stock spring and shock setup, a coilover system provides a much better ride on or off pavement. In addition, this kit can be adjusted for 3 to 5 inches of lift to allow for the added weight of bigger bumpers, winches and snowplows. Not simply a race-style shock that’s been modified to fit this application, but rather a shock that was designed from the ground up with on- and off-road performance in mind. ICON has tested and tuned the Dodge Ram coilovers to ensure stability and drivability over a wide range of terrains.

Where To Get It:
ICON Vehicle Dynamics, 951-689-ICON (4266), www.iconvehicledynamics.com

TOWING TROUBLE SOLVER

What It Is:
Jet Connex Trailer Wire Harness

Why You Want It:
The Jet Connex trailer connection wire harness is the solution to the nightmare problem of the taillight on your trailer not working due to damage and disconnection of the flimsy wire harness that comes with most trailers. The Jet Connex solves this problem by taking those flimsy wires that hang down between the truck and trailer out of the hitch area completely. Just secure those flimsy wires to the trailer frame and bumper area, and after you attach the trailer to the vehicle, attach the Jet Connex across the hitch area, thus eliminating frayed or cut taillight connections. The Jet Connex is a coiled, jacketed power cable with customized connectors. It comes in two (3- and 6-feet) extended lengths. The jacket is made of a water- and abrasive-resistant composite that can handle the rough treatment and conditions faced in marine and desert environments. Combinations of flat and round connectors are offered to match most vehicle/trailer combinations.

Where To Get It:
Reedex, Inc., 714-894-0311, www.jetconnex.com

RAM TRUCK FACTORY LOOK GAUGES

What It Is:
Auto Meter Gauges For Fourth-Gen 2010-up Ram Trucks

Why You Want It:
Auto Meter now offers factory match gauges for the new fourth-generation Ram trucks. These factory match gauges are available in the most popular and critical diesel performance parameters including boost, pyrometer (EGT), transmission temperature, fuel pressure and fuel rail pressure. They can be ordered individually or as pre-packaged kits complete with vehicle-specific mounting solution. They feature OEM-detailed styling that blends seamlessly with your 2010 and up Ram truck interior, from unique pointers and dial artwork, to color-matched LED backlighting and chrome bezels.

Where To Get It:
Auto Meter Products, Inc., 866-248-6356, www.autometer.com

FORD E4OD/4R100 SHIFT IMPROVER

What It Is:
Valve Bodies For 1990-03 Ford Super Duty Pickups

Why You Want It:
The Factory Tech accumulator valve body offers better performance, improved quick and firm shifts, cooler-running transmission and more. This means extended longevity of your automatic transmission. Available for 1990-2003 Super Duty/Heavy Duty Series, E-Series, Excursion and other Ford vehicles. DW

Where To Get It:
DIESELSITE, 888-414-3457, www.dieselsite.com