Search Result: factory short block

It’s always a bit of a gamble on how much you can push the envelope of a stock vehicle before parts start to give way. […]

Ryan Milliken successfully campaigned his 2007 Dodge Ram 2500 4X4 named “Buckwheat” from 2012-2014, winning the NHRDA Super Street National Championship. But a destructive run-in […]

The crew at 5 Knights Custom Accessories out of Lubbock, Texas, has been working on custom vehicles since they were all old enough to turn […]

Not only is Aaron Flournoy’s Ram that you see on these pages a daily driver, it’s currently his wife’s daily driver. Since Aaron is bigger […]

Building A Super-Strong 9.25 AAM Front Axle For Your GM Or Dodge The independent front suspension system and 9.25-inch AAM axle delivered in 2001-2010 GM […]

1500hp in a 3,600-pound package Drake Swett, the owner of Total Performance Diesel in Santa Rosa, California, likes drag racing. He likes it so much […]

A 927 Horsepower 6.7-Swapped ’06 Ram with All the Right Parts David Locke always liked his ’06 Dodge Ram 3500. It was reliable, had decent […]

A Pro Stock Dodge Packing Cut Tires and 1,850 HP Believe it or not, nine years is a long time in the truck pulling game. […]

Brad Deeter’s 3,000 hp, 3,500 lb-ft. Cummins-Powered Sled Killer The sport of Super Stock diesel truck pulling has advanced by leaps and bounds in the […]

The sharp, clean lines of this 2009 Dodge are quick to catch the eye, as is the smooth, seemingly wet red paint. From the word […]

Attitude Performance P-Pump Adjuster Due mostly to the electronically controlled engines in today’s trucks, over the past few years the 1994-1998 12V Cummins has become […]

A 750HP ’02 Dodge Common-Rail That’s Worth Every Penny When you’re a second-gen connoisseur, chances are pretty good you’ll own a few of them. As […]

Lavon Miller is the 31-year-old owner of Firepunk Diesel, the highly successful diesel performance shop out of Plain City, Ohio. After winning a large diesel […]

Super Stock diesel trucks have gotten downright crazy over the last several years. With somewhere around 3,000 hp being the norm now, these tiltbody, tube […]

A Factory-Approved CP3 Conversion For Your ’19-’20 Ram With a CGI block, forged-steel connecting rods, updated pistons with low-friction rings, and 1,000 lb-ft of torque […]

Breaking the Mold with a 3,600-lb, 1,800-hp 4×4 Ram When it comes to drag racing, lightness is king. Diesel 4x4s, on the other hand, are […]

A 1,200-HP PULLER BUILT TO DOMINATE Mitch Meinhart is a diesel guy, there’s no doubt about it. While he doesn’t own his own diesel shop, […]

AN INSIDE LOOK AT TRUCK PULLING’S NEW 2.6 CLASS Love it or hate it, smooth bore turbocharger rules are here to stay in truck pulling. […]

It’s not very often that you get to see trucks that are raced, and are still as clean as Adam Aquino’s ’07 Ram. Sure, Aquino’s […]

A COLLEGE STUDENT BUILDS AN 800-HP ‘17 RAM SHOW-STOPPER If you would have told me this is where I would be, and this is what […]