Diesel Performance Upgrades

01. S300 Replacement Turbo for the 2007.5-2018 6.7L Cummins

If you were forced to replace a major component on your truck due to premature failure, would you give the same exact part another chance, or would you want a more reliable solution? Now picture an aftermarket alternative that’s more reliable, more affordable, and that also comes with a guaranteed performance gain.

Smeding Diesel
210-446-0888
SmedingDiesel.com

02. CPX Injection Pumps

CPX Injection Pumps are a reengineering of the Bosch CP4. Pinned lifter buckets prevent rotation and stop failures, even during a gel-up. A new feed port prevents any contaminated crankcase debris from entering the plungers and barrels, acting as a built-in disaster prevention kit. Get yours for Ford, Nissan, Jeep, and
Ram applications.

RCD Performance
309-822-0600
RCDperformance.com

03. Lava Wastegate Shield

The Lava Wastegate Shield increases power, improves exhaust efficiency, and substantially reduces underhood heat. The shield is a specially designed thermal barrier that protects the turbocharger wastegate and its critical internal components from excessive heat exposure.

HeatShieldProducts
760-751-0441
www.HeatshieldProducts.com

04. AirDog II-4G 165-gph Air/Fuel Separation System

This is the AirDog II-4G DF-165 fuel system for the 2001-2010 Duramax 6.6L diesel. The company’s Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 165-gph (gallon per hour) fuel system for moderately modified trucks.

AirDog
877-463-4373
AirDogDiesel.com

05. 23+ Ford F-250/F-350 4X4 Low-Mount Steering Stabilizers with Diff Guard

Minimizing resonation from encountered road obstacles into the frontend parts is key to combating frontend issues like death wobble. Carli Suspension has always offered a high mount stabilizer to combat steering wheel feedback in these trucks. The stainless steel design is far superior to the factory unit boasting a custom valve profile improving control of larger aftermarket wheel and tire combinations, offered adjustability to combat right-hand tire pull and is fully rebuildable all while bolting into the factory location ensuring it’s not susceptible to trail damage like many aftermarket stabilizer units are that mount in front of lower steering linkage.

Carli Suspension
888-99CARLI
www.CarliSuspension.com

06. Custom-Fit Engine Heaters 

FrostHeater has been manufacturing custom-fit engine heaters for over 23 years and has kits for Volkswagen TDI, Super Duty 6.7L, and more! The company’s kits are easier to install and a step above a traditional block heater since they circulate heated coolant throughout the engine, not just a back corner of the engine. Increase your engine life, increase your DPF life with less soot at start up, and increase your comfort level inside the vehicle with cabin heat sooner.

FrostHeater Inc.
www.FrostHeater.com

07. HD DIY Traction Bar Kit

All traction bar kits have improved pricing, FFS badging, and included hardware, making FarFromStock’s kits more complete and affordable than ever! These parts are to build a hardcore, heavy duty, no rattle, and good-looking traction bar set. We’ve seen all kinds of weak and undersized parts and ugly brackets; this is not that kit. Tubing available in 4-, 5-, or 6-foot lengths.  Five feet covers most installs.

FarFromStock
740-939-0073
FarFromStockStore.com