The new Banks Ram-Air Intake System is now available for Cummins, Duramax and Power Stroke diesels. The Banks Techni-Cooler system provides denser, oxygen-rich air, which greatly increases the power potential of every liter of air the engine pumps. The system provides more power at any EGT; from 130 to 140 more lb-ft compared to a tuner alone. With Banks Techni-Cooler system, you'll get the most continuous, useable power.
The core area of Banks Techni-Cooler is up to 25 percent larger than stock for tremendous cooling capacity. Bigger, high-efficiency, all-aluminum (not plastic!) end tanks optimize airflow and will never melt or burst under extreme boosting conditions. Air density is increased by up to 10 percent, which improves power output and keeps EGTs lower. Banks boost tubes are large and streamlined with no kinks or smashed areas; mandrel-bending keeps the air flowing through with a minimum of pressure loss. For more information, call Banks at (888) 635-4455 or visit www.BanksPower.com. Edge Juice Tuner
Edge Products new Juice module for the 2006 Cummins, when coupled with the optional Attitude or A2 monitor/controller, offers five standard power modes plus an available HOT Level 6, which increases performance by 160 HP/350 lb-ft. By itself, the Juice underhood module has three levels, ranging from 25 to 60 extra horsepower. The Attitude or A2 controller adds 80 HP/200 lb-ft (Level 4) and 100 HP/250 lb-ft (Level 5). For customers who want to race or enjoy short blasts of extreme Level 6 power, Edge offers a HOT Unlock Code option.
Diagnostic and testing features are also included in the Juice With Attitude. The Edge system allows customers to read and clear Check Engine trouble codes. Performance values for 0-60 MPH and quarter-mile acceleration can be captured and stored. The Attitude or A2 also shows true road speed when recalibrating for non-stock tire sizes and axle. For more information, contact Edge Products Inc., 1080 S. Depot Dr., Ogden, UT 84404, 888/360-4434, 801/476-3343, fax 801/476-3348, www.edgeproducts.com. Silverline Muffler Eliminator Pipes
ANSA Automotive's Silverline brand of Stainless Steel Diesel Performance Exhaust is now offering single and dual Diesel Eliminator Pipes for those who want to eliminate their muffler for a straight-through exhaust tone. These pipes are constructed of top-quality T304 stainless steel with polished welds and a mirror bright finish, giving a seamless appearance. Available in four different versions to fit all Silverline Diesel kit applications, these pipes give you that deep diesel roar you are looking for. Ask for part #'s DMPSS, DMPSL, DMPDL and DMPDS.
Silverline Stainless Steel Exhaust is available exclusively through ANSA Automotive Parts Distributors, Inc. For more information call 1-800-841-9166, or visit www.SilverlineExhaust.com for the complete product listing and online catalog. Dealer inquiries are invited. TS Performance Tuner
TS Performance's new 5X Power Loader gives you five horsepower settings and a valet mode for the Ford 6.0-liter Power Stroke. The 5X Power Loader offers you a selection of 50, 75, 100, 135, and 150 horsepower levels from one download. This allows you to tailor your horsepower levels on the fly for a variety of towing and performance applications whenever you need it. Furthermore, you can select a valet mode which limits the horsepower output for those occasions when you don't want anyone frying your tires while you're enjoying dinner.
The 5X Power Loader also allows you to download upgrades and custom programs from TS Performance and the unit has the capability of upgrading multiple vehicles at one time, making it one of the most versatile programmers available. For more information, contact TS Performance, 5425 Nashville Rd., Bowling Green, KY 42102. 270-746-9999 or visit them on the web at www.tsperformance.com. TCI Cooling Transmission Pans
With transmission pans, having a large volume of transmission fluid available will keep your transmission running cooler, and as a result, deliver better performance and longer life. Built for Dodge 46RH-48RE, Ford E4OD/4R100 and 5R110, as well as the General Motors 4L80E/4L85E transmissions, these aircraft-quality aluminum pans are built to deliver years of long lasting service.
TCI Large Capacity Aluminum Transmission Pans feature cooling fins, which, along with the increased fluid volume and heat-dissipating external powercoated finish, have resulted in a drop of 20 to 30 degrees in internal transmission temperature. Each transmission pan comes ready to install with everything you need and includes a magnetic drain plug to help keep any loose metal from being circulated through the transmission. To protect against driveway drips, where applicable, each pan is o-ringed to ensure a tight leak-free seal. For more information about the TCI Large Capacity Aluminum Transmission Fluid Pans contact TCI at 662-224-8972 or online at www.tciauto.com. B&M Heavy-Duty Converters
If you've noticed your transmission slipping under extreme loads, chances are you're overtaxing your converter. B&M Task Master torque converters are specifically designed for light-duty diesel truck motors. Available for Duramax, Cummins and Power Stroke engines, the Task Master is capable of handling loads in excess of 20,000 pounds GVW. Each Task Master has been fully furnace-brazed and includes a multi-disk lock-up clutch offering three times the amount of clutch surface area of a stock converter. A heavy-duty, billet steel cover and lock-up assembly make the Task Master ideal for modified power plants producing large amounts of torque.
For more information contact: B&M Racing & Performance Products, 9142 Independence Avenue Chatsworth, CA 91311, USA Ph: 818-882-6422 Fax: 818-882-6694 or on the web at www.bmracing.com Force Automotive's Custom Steps
Force Automotive's Ultimate Steel Steps combine functionality with great style. The Ultimate Steel Steps are made from tough, chrome-plated 1/4-inch steel backed by Force's 12-month warranty. Available in FLAME or HOLE designs, these steps give your truck a great customized look. The Ultimate Steel Step is available in two lengths, with vehicle specific mounting kits sold separately. It gives a great finishing touch to any vehicle. For more information about the Ultimate Series Step and other new Force Automotive products, contact: Force Automotive Products, 5306 Industrial Drive, Huntington Beach, CA 92649; 714-375-9870; FAX: 714-375-0640
